FAQs
More FAQs- Why should I get tile & grout professionally cleaned?
- How long will it take to have my floors coated with acrylic?
- How often do I clean my floors?
High traffic gradually dulls the floors and the grout becomes dark with dirt. Regular mopping only removes surface-level dirt and often leaves residual dirt in the grooves of the grout. This is particularly troublesome if your tile flooring has not been properly sealed as grout is highly porous.
Preparation will depend on the condition of the existing floor, current number of coats, repairs required, etc. When applying an acrylic finish, stripping of the old finish is usually necessary. When that’s the case, finish removal plus the application of 3 coats of finish requires 1 hour for every 150 square feet of flooring. Generally, 3 coats of finish are required to achieve the desired effect. If a floor does not require stripping, it can generally be shower scrubbed which is a procedure used for preparing a floor for receiving a new layer of finish. Once that has taken place, a floor can be recoated at anywhere from 4,000 to 6,000 square feet per hour.
Floors should definitely be cleaned when they appear to be dirty. It is good practice to clean floors before it gets to that level because the floor can accumulate many tiny abrasive particles which can scratch it and mar its appearance. It is generally best to dry mop a floor with a microfiber cloth and then damp mop the floor with an appropriate cleaning solution to get up the soil.