FAQs
More FAQs- Why should I get tile & grout professionally cleaned?
- Are there instructions to follow after my carpets are cleaned?
- How long will it take to have my floors coated with acrylic?
High traffic gradually dulls the floors and the grout becomes dark with dirt. Regular mopping only removes surface-level dirt and often leaves residual dirt in the grooves of the grout. This is particularly troublesome if your tile flooring has not been properly sealed as grout is highly porous.
Immediately after cleaning, it’s best to allow carpets to dry for 6-8 hours before walking on them. Walking on them may flatten the fibers. Use air movers if needed to help air circulation as this will speed up the drying time. If a carpet protector such as ScotchgardTM was applied, foot traffic should be minimized for up to 24 hours to let the product cure. Don’t move any furniture back in place until carpet is completely dry or the Scotchgard carpet protector has cured.
Preparation will depend on the condition of the existing floor, current number of coats, repairs required, etc. When applying an acrylic finish, stripping of the old finish is usually necessary. When that’s the case, finish removal plus the application of 3 coats of finish requires 1 hour for every 150 square feet of flooring. Generally, 3 coats of finish are required to achieve the desired effect. If a floor does not require stripping, it can generally be shower scrubbed which is a procedure used for preparing a floor for receiving a new layer of finish. Once that has taken place, a floor can be recoated at anywhere from 4,000 to 6,000 square feet per hour.